How to Use the Camera in Hyflex Classrooms

Owned by Joe Swenson, created
Feb 15, 2024
1 min read

On the Control Panel

 

  1. After powering on the touch screen panel of the hyflex classroom, click on Camera on the left side of the screen.

  2. There are three presets available for your use. Pressing either 1, 2, or 3 will enable that preset. You can change a preset by using the arrows and zoom to adjust the camera and then hold down the preset number that you would like to change for 5 seconds to set it.

    image-20240215-152951.png

  3. Clicking the home button located in the middle of the pan/tilt arrows will enable the automatic camera mode. This mode will follow your movement and zoom in or out according to where you are located to keep you in frame. It will also zoom out if there are multiple people located in its range of vision to fit both individuals on the screen.

 

If you have any questions, please contact Technology Support at 612-659-6600 or http://technology.minneapolis.edu .